SPECIFICATIONS

Alarm: No

Brand Name: iTenen

Certification: CE,FCC,RoHS

Communication Interface: WireLess

Display: Color

Feature: Photograph,Video

High-concerned chemical: none

Item Type: PeepHole

Itercom: No

Origin: Mainland China

Power: Dry battery

Smart home platform: Tuya

Welcome to my shop!

Please note the following before and after purchase:

1. The device only supports 2.4G Wifi, not 5G.

3. Long press the button on the monitor for 6 seconds will reset the device, do not press and hold the monitor button when the device is connected to WIFI. This will cause the device to disconnect. You can check the FAQ at the bottom of the details to solve it.

4. If you encounter other problems when connecting your device, you can check the FAQ at the bottom of the details. Happy shopping!

Note to Spanish buys: If you do not receive your shipment for more than 7 days, please go to the nearest DHL site to pick it up.

Funciton:

*4.3 inch high-definition LCD

*3MP image ultra-Low Power Consumption Design

*Quick access via app (automatically wakes up within 3 seconds)    

*Respond to users access demands within 1 second

*3pcs IR Leds,Support one-way audio

*APPsupport iOS&Android,Tuya Smart/Smart Life   

*PIR Motion Detect Alarm

*Cloud Storage Function

*Support max 128GB TF card(save Video recording)

*Built-in Lithium Battery and Easy Charged by Type C

*Easy Installation (no need any cable),just Wifi(2.4GHz) connection

The infrared filter used by the camera, if directed at the sunlight, filters other colours and gives the image a purple cast. It is suitable for stairways and indoor corridors, not for courtyards and villas with doors facing the main road in bright light environments.

FAQ

1. The device cannot connect to WIFI

W: The second step to add a device,Please select the "Smart Doorbell" option, not the "Smart Doorbell" option with "Dual band".

2. The device cannot scan the QR code of the mobile phone to connect to WIFI

W:Please note that the QR code behind the device cannot add the device, please follow the instructions to add it.

1.Please check if your WIFI password is correct.

2.Aim the QR code generated on your mobile phone at the camera, and after hearing the voice broadcast, please click "Hear the voice broadcast" on your phone to enter the device connection.

3.The indicator on the monitor keeps flashing, please press and hold the button on the monitor for 6 seconds to reset the device, and then add it again.

3. The device is disconnected after a few minutes of connection

W: The device may have been reset in the connected state (do not press and hold the monitor button when viewing the display)

1. Remove the device from your phone

2. press the button on the monitor for 6 seconds, reset the device

3. add the device again

4. Trigger motion detection notification but no video

W: Please go to Settings in the upper right corner of the viewing screen, find the Detection Alarm setting, and turn off the human filter.